Resetting the date and time
You can reset the date and time in the menu system.
(1) Press MENU to display the menu.
(2) Press +/– to select ETC, then press EXEC.
(3) Press +/– to select CLOCK SET, then press
(4) Press +/– to adjust the desired year, then press
(5) Set the month, day, hour and minute by pressing
(6) Press MENU to erase the menu display.
To correct the date and time setting
Repeat the above procedure.
To check the preset date and time
Press DATE to display the date indicator.
Press TIME to display the time indicator.
When you press the same button again, the indicator
goes off.
14
-EN
EXEC.
EXEC.
+/– and EXEC.
1, 6
(MENU)
2, 3, 4, 5
(+/–,
EXEC)