Neuromod Lenire Manuel De L'utilisateur page 24

19.6 - I tend to fall asleep during the treatment- Is this a problem?
Falling asleep during a treatment session is not advised. It is important that the Tonguetip remains
in place and contacting your tongue throughout the treatment session.
19.7 - I only received one charger in the box, is that correct?
Yes. The same charger is used to charge the Controller and the Headphones.
See page 11 for details.
19.8 - What should I do if I miss a treatment session?
To maximise the effectiveness of the treatment, it is important to adhere to the treatment regimen
prescribed by your clinician. If you miss a treatment session on any particular day, it is advisable
that you continue treatment as normal the following day.
19.9 - My Headphones won't connect, even though the light on the Headphones indicates that
it is connected
It is possible that another device, such as a mobile phone or a personal computer, is connecting
to your Headphones thereby preventing the Controller from connecting to them. Try either
• Turning off any mobile phones, or other computer devices that are close by.
• Moving to a different location, away from any computer devices.
If none of these steps fixes the problem, please contact customer support (see page 27).
Chapter 20 - Bluetooth pairing / un-pairing
The Controller sends audio to the Headphones wirelessly using Bluetooth, and for this to work,
the Controller and the Headphones need to be 'paired', allowing the two devices to connect
automatically henceforth.
20.1 - Pairing Headphones to the Controller
The first time you try to use the Controller and Headphones together you may need to pair the
devices as follows:
• Put the Headphones into pairing mode
by first ensuring they are powered off,
and then powering them on by briefly
pressing the Headphones power button
as indicated below. The light adjacent
to the Headphones power button will
flash blue rapidly to indicate that the
Headphones are in pairing mode.
• Switch on the Controller by pressing the
power button for 2 seconds.
• Place the Controller into pairing mode by
pressing the play, pause and volume + buttons
at the same time. All indicator lights will flash
blue for 2 seconds.
IFU-0026 Lenire User Manual Version 1.0 Page 23