Neuromod Lenire Manuel De L'utilisateur page 13

The supplied Charger can be used for charging both the Headphones
and the Controller
10.1 - Charging the Controller
To charge the Controller:
• Plug the cable end of the supplied Charger (XP
Power model VEP08US05-XE0767) into the
Controller port of the Controller.
• Plug the Charger into a mains electrical socket.
While charging, the Battery Indicator will pulse orange. Once the battery is fully charged, the
Battery Indicator will pulse green.
An empty battery should take no more than 3 hours to fully recharge, and
a full charge should allow the Lenire device to be used for at least 8 hours.
Once the battery is fully charged, the Charger should be disconnected
to help conserve the life of the battery in the Controller.
10.2 - Charging the Headphones
To charge the Headphones:
• Plug the cable end of the supplied
Charger (XP Power model VEP08US05-
XE0767) into the USB port of the
Headphones.
• Plug the Charger into a mains
electrical socket.
While charging, the light on the Headphones will illuminate red. Once the battery is fully charged,
the light on the Headphones will extinguish.
Page 12
English