Peg-Perego PRIMO VIAGGIO SLK Notice D'emploi page 11

• Install this car seat only on seats facing the direction of
travel. If the vehicle has rotating or repositionable seats,
position them facing the direction of travel.
• Do not fit this car seat onto passenger seats which have
active airbags. Deactivate the airbag before fitting the
car seat. Using this car seat on seats with active airbags
may cause serious injury or death in the event of an
accident.
• Check that the child car seat is not blocked by a moving
part of the seat or a door.
• Scrupulously follow installation instructions; do not use
installation methods other than those recommended
because they could cause detachment of the car seat.
• Always use the harness when using this car seat.
• Adjust the height and tension of the shoulder straps
ensuring that they are snug to the child's body without
constricting him/her too much. Check that the harness
is not twisted and that the child does not release it.
• To avoid the risk of falling, always use the car seat
harness even for transport outside the vehicle.
• The car seat is not a substitute for a cot; if the child
needs to sleep it is important to lie him/her down.
• Do not use the child car seat if it is broken or if there
are missing parts, or if it has been subjected to heavy
impacts as a result of accidents, as it may have suffered
structural damage which is not visible but is extremely
hazardous.
• Do not use the car seat without its fabric cover; this
must not be replaced with one not approved by the
manufacturer since it is an integral part of the car seat
and the safety system.
• Do not remove or replace the white polystyrene part
under the seat, in the backrest and in the headrest, as it
is essential for safety purposes.
• Do not leave the car seat in the vehicle when exposed
to the sun. Some parts might heat up and be harmful
to the delicate skin of the child -check before placing
the child in the seat.
• Do not modify the product.
• Do not remove the adhesive and stitched labels since
this might make the product non compliant with legal
requirements.
• For any repairs, replacement parts and information
about the product, contact the after-sales assistance
service. Contact information is provided on the last
page of this manual.
• Do not use accessories not approved by the
manufacturer or by the competent authorities.
• If using a second-hand product, make sure it is a recent
model, comes with instructions, and is fully functional
in all parts. An obsolete product may not conform to
safety standards, due to natural ageing of materials and
updating of regulations. If you have any doubts, contact
the manufacturer's customer service centre.
• Make sure there are no items of luggage or other
unsecured items in the vehicle interior. They could
injure the vehicle's occupants in the event of an
accident.
• This product requires only minimal cleaning and
maintenance. These operations must be performed by
20
adults.
• It is advisable to keep all the moving parts clean.
• Clean plastic parts periodically with a damp cloth. Do
not use solvents or similar substances.
• Do not clean the polystyrene shock absorbing device
with solvents or other similar products.
• Brush fabric parts to remove dust. If you wash fabric
parts, follow the washing instructions on the laundry
label.
• Protect the product from atmospheric agents: humidity,
rain or snow. Extended exposure to sunshine can cause
colour changes in many materials.
• Store the product in a dry environment.
WARNING: FOR USE AS A
RECLINED CRADLE.
• Do not use the reclined cradle once your child can
sit unaided.
• This reclined cradle is not intended for prolonged
periods of sleeping.
• It is dangerous to use this reclined cradle on an
elevated surface, e.g. a table.
Components of the Product
Inspect the content of the package and contact
Customer Care if any items are missing.
The child car seat includes:
a) Hood
b) Handlebar
c) Kinetic Pods: side protections
d) Headrest
e) Harness tension release button
f) Harness tension adjustment strap
g) 3-point safety harness with shoulder straps
h) Lever for release from base
i) Headrest height adjustment button
l) Instruction manual compartment
m) Headrest covered with shock-absorbing expanded
polystyrene foam (EPS)
n) Shell covered with shock-absorbing expanded
polystyrene foam (EPS)
o) Dual Stage Cushion
The car seat is ready for use: no assembly required.
Instructions for use with base
Refer to the user manual inside the box to install
the Base i-Size and Base Twist car seat bases.
1 Primo Viaggio SLK features the Ganciomatic System for
connection and release in the car with the Base i-Size/
Base Twist.
To attach the Primo Viaggio SLK to the Base i-Size/
Base Twist, align it with the connections and push it
downwards until it clicks in place (fig_a). Make sure
that the red/green indicators are in the green position
(fig_b).
2 Press the two buttons on the handlebar, turn them and
position against the vehicle seat.
3 To release the Primo Viaggio SLK from the Base i-Size/
21