Progress PAI3100F Notice D'utilisation page 27

Automatic Switch Off
The function deactivates the hob
automatically if:
• all cooking zones are deactivated,
• you do not set the heat setting after you
activate the hob,
• you spill something or put something on
the control panel for more than 10
seconds (a pan, a cloth, etc.). An
acoustic signal sounds and the hob
deactivates. Remove the object or clean
the control panel.
• the hob gets too hot (e.g. when a
saucepan boils dry). Let the cooking
zone cool down before you use the hob
again.
• you use incorrect cookware. The symbol
comes on and the cooking zone
deactivates automatically after 2
minutes.
• you do not deactivate a cooking zone or
change the heat setting. After some time
comes on and the hob deactivates.
The relation between the heat setting
and the time after which the hob
deactivates:
Heat setting
, 1 - 2
3 - 4
5
6 - 9
The heat setting
Touch to increase the heat setting.
Touch to decrease the heat setting.
Touch and at the same time to
deactivate the cooking zone.
Power function
This function makes more power available
to the induction cooking zones. The
function can be activated for the induction
cooking zone only for a limited period of
All manuals and user guides at all-guides.com
The hob deacti-
vates after
6 hours
5 hours
4 hours
1.5 hour
time. After this time the induction cooking
zone automatically sets back to the highest
heat setting.
Refer to "Technical information"
chapter.
To activate the function for a cooking
zone: touch .
To deactivate the function: touch
.
Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
and again until the indicator of a necessary
cooking zone comes on.
To activate the function or change the
time: touch
or
time (00 - 99 minutes). When the indicator
of the cooking zone starts to flash slowly
the time counts down.
To see the remaining time: set the
cooking zone with
cooking zone starts to flash quickly. The
display shows the remaining time.
To deactivate the function: set the
cooking zone with
remaining time counts back to 00. The
indicator of the cooking zone goes out.
When the time comes to an
end, the sound operates and 00
flashes. The cooking zone
deactivates.
To stop the sound: touch
Minute Minder
You can use this function as a Minute
Minder when the hob is activated and the
Progress 27
comes on.
again
of the timer to set the
. The indicator of the
and touch . The
.
or