Spypoint LIVE Manuel D'utilisation page 11

20
Sets the detection sensitivity of the camera.
Sensitivity:
(Low/Medium/
High)
Note: The system detects only heat sources in
motion. So it is important during installation to
avoid as much as possible, objects obstructing
the camera . This prevents the camera from
being triggered because of the sun reflecting on
these objects. (e.g. a tree branch)
Allows the user to select the type of power
Power:
(Batteries/
supply.
Electricity)
Choose "Electricity" if the camera is powered
by a main electric supply. (using a 12-volt DC
adapter AD-12V, sold separately). Main electric
power supply is recommended when use for
security purposes. It provides an instant trigger
time when a movement is detected. The lithium
battery pack and the AA batteries can remain
safely inside the camera and it is ideal in case
of a blackout.A 12-volt DC adapter that can
provide a minimum of 800 mA is required
(See OPTIONS for accessories).
When the option "Electricity" is enabled:
• The option "Delay" is reduced and locked to
2 seconds to speed up the photo shooting.
• The "Multi-shot" speed is improved with a 2
seconds delay between each take.
• The option "Time Lapse" is disabled
• The option "Synchronize" is locked on
"Permanent" to allow the transmission of
pictures at every synchronisation.
• The option "Synchronize at" is ignored.
• If the option "Multi-shot" is enabled, the
transmission is performed once the series of
photos is recorded.
• The camera is synchronized with the server
every 10 min. and uses an average of 1.4Mb
of data per day excluding the weight of
pictures transmitted during this period.
• The viewing screen may light up momentarily
during synchronizations.
All manuals and user guides at all-guides.com
Allows the camera to operate in continuous
Continuous:
(Yes/No)
mode. When there is no more space available on
the memory card to record photo or video, the
camera continues to record by erasing the oldest
files and by replacing them with newest ones.
Selects the desired infrared illumination mode.
Infrared:
(On/One LED/Off)
All LEDs illuminate when taking photos
ON:
or videos at night.
Only a single LED illuminates (see
One LED:
figure). This option can be useful when using
an IR-Booster.
LEDs are deactivated so your night
OFF:
photos or videos are pitch black.
Displays system information:
Info:
• Model name
• Serial number
• SIM card number
• IMEI Number
• Phone number
• Software version
21
One LED