cecotec Mambo 10070 Manuel D'instructions page 48

ENGLISH
the display.
2. Turn the knob left to decrease heat power and right to increase it, from level 1 to 10.
3. Low heat power is suggested to cook fatty foods to avoid it from burning and small
quantities of food, as both require precise temperature and control.
4. High heating power will cook food much faster.
5. The heat power function will not activate unless the temperature is set too. It is suggested
to use the default setting for each temperature level.
Scale
- Mambo 10070 includes a built-in kitchen scale. It weights up to 4,999 grams, in a 1-gram
interval.
- To activate the scale function, the robot must be in pause mode and the lid must be
unlocked (Fig.8.). The scale icon will be displayed on the panel when the scale is ready to
be used.
- The scale cannot be used with the lid closed. If the lid is closed, the scale icon will remain
off and the display will show "ABRIR TAPA OPEN LID".
- Tap the scale icon, the display will show "0 00 0" by default, indicating the scale has been
activated. Ingredients are weighed as they are introduced in the jar, and the display shows
the exact value.
- If there are ingredients inside the jar already and new ones are introduced, the scale will
add both values and the display will show the total weigh. If food is removed from the jar,
the scale will take away that weight from the total and will display the final value. The
display might show negative values when food is removed from the inside of the jar.
Tare function
- To restore the weight displayed and tare the scale with food inside the jar, tap the scale
icon. The display will show "0 00 0" again and the robot will be ready to weight new foods.
- To quit the scale menu and return to pause mode, tap any of the robot icons. The
display will show the parameters previously set.
Turbo
1. When the robot is paused, press this button for the appliance to operate at maximum
speed. The display will show TURBO flashing.
2. Stop pressing the button for the appliance to stop operating under this function. The
robot will automatically stop.
3. This function can only operate for 1 minute maximum each time.
Warning
When the TURBO function is activated, the device could emit some noise. This is completely
normal and does not affect the device's operation.
48