Publicité
Les langues disponibles
Les langues disponibles
-
Heating (without blending): max. 12 hours.
-
Blending (speed 1-4): max 1 hour.
-
Beat (speed 5-10): max. 5 mins.
Stopwatch function
1.
The set a time countdown without any other function (to ferment, let cool or let food sit if
indicated by a recipe), follow these steps:
2.
The display shows time as: hour:minutes:seconds.
3.
Hold down the timer button for 5 seconds, the display will show 30 minutes.
4.
Press the timer button once, the minute digits will flash.
5.
Turn the knob left or right to adjust the desired minutes.
6.
Press the timer button again to switch to seconds, the seconds digits will flash.
7.
Press the timer button again to switch to hours.
8.
Turn the knob left or right to adjust the desired hours.
9.
To confirm, press the start/stop knob.
10. The stopwatch will start counting down and will beep when time has elapsed.
Speed
1.
Press this button to enter speed-setting mode. The speed icon will flash on the display.
2.
Turn the knob left to decrease speed and right to increase it, from level 1 to 10.
3.
If the selected speed is 5-10, the timer will only be set up to 5 minutes. For the rest of the
speed options, 1 hour.
Warning
-
When speed changes from 5 to 6 or when the device starts working, the device could emit
some noise. This is completely normal and does not affect the device's operation.
-
To crush or chop hard or large quantities of food, select speed 5 at first and then switch it
to 10 to ensure perfect performance.
Temperature
1.
Press this button to enter temperature-setting mode. The temperature icon will flash on
the display.
2.
Turn the knob left to decrease the temperature and right to increase it, from 37 ºC to 120
ºC. The selected temperature value will blink until the robot reaches the set temperature.
3.
The temperature indicator will turn on red when the jar reaches very high temperatures,
as a warning to avoid burns.
4.
If the temperature icon is red and you want to operate the machine at a high speed, reduce
the food quantity to below 1.5L.
Heating power
1.
Press this button to enter heat-power setting mode. The heat power icon will flash on
ENGLISH
47
Publicité
