Télécharger Imprimer la page

cecotec Mambo 10070 Manuel D'instructions page 46

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 56
ENGLISH
-
Make sure the product is in good conditions. If any sign of visible damage is observed,
contact immediately with our official Technical Support Service.
-
Place the appliance on a clean, stable and flat surface. Do not place it close to the edge,
inside built-in wardrobes or hanging brackets.
-
Clean the appliance before using it for the first time.
-
Connect it to a power supply and press the power switch to turn it on. The machine will
beep and the display will turn on.
4. OPERATION
On/off
Use this switch to switch the product on and off.
Start/pause
Fig.20
1.
Press the knob on the product's front part to activate the device.
2.
From the main display, select the desired function.
3.
During the configuration process, hold down the knob for 2 seconds to reset all the
settings.
4.
While it is cooking, press the knob to stop it and long-press it for 2 seconds to reset all
settings.
5.
After 10 minutes of no operation, the device will enter standby mode.
6.
Once the desired setting or program has been selected, press the knob to activate it and
the device will automatically start operating.
7.
During operation, press the knob to pause the cooking process. The display will show
"PAUSE". You may open the lid, stir or mix ingredients, remove the jar...
8.
Then, place every element back in its correct position and press the knob again to resume
operation. After 10 minutes in pause, the device will automatically turn off.
9.
Use the knob to adjust all settings: time, temperature etc. Turn it clockwise to increase the
value and anticlockwise to decrease it.
Timer
1.
The display shows time as: hour:minutes:seconds.
2.
Press the timer button once, the minute digits will flash. Turn the knob left or right to
adjust the desired minutes. Press it again to switch to seconds, the seconds digits will
flash. Press it again to switch to hours. Turn the knob left or right to adjust the desired
hours.
3.
During operation, press the timer button and the device will start counting down
automatically.
4.
If the timer has not been set, the product will operate with the preset times:
46

Publicité

loading