SFA Sanicubic GR Notice De Service / Montage page 17

1. SAFETY
1.1 IDENTIFICATION OF WARNINGS
DANGER
WARNING
NOTICE
1.2 GENERAL POINTS
The operation manual at hand provides basic
notes which have to be taken into account during
assembly, operation and maintenance works.
Therefore, before assembly and commissioning,
this operation manual has to be read by the
assembler as well as the responsible personnel/
operator at all costs. It always has to be available
on site of operation of the machine/plant.
The general safety notes listed under the main
point safety are not the only notes to be taken into
instructions, such as those for private use, listed
under other main points.
1.3 INTENDED USE
application described in this documentation.
• The lifting station must only be operated in
technically perfect conditions.
• Do not operate the partially assembled lifting
station.
described in this documentation.
• The lifting station must never operate without
• Consult us for operating modes not described in
this documentation.
documentation.
• The safe operation of the station is only ensured if
it is used as described in this manual.
Meaning
of danger, which can lead
to death or serious injury, if
not avoided.
risk of danger, which can
lead to serious or minor
injury, if not avoided.
This term characterises
dangers to the machine
and its proper operation.
Warning of a general
danger.
by indications given in the
table.
This symbol characterises
dangers associated with
the voltage and provides
information on voltage
protection.
1.4 QUALIFICATION AND TRAINING OF STAFF
Commissioning and maintenance of this device
Please refer to installation standard EN 12056-4.
1.5 SAFETY INSTRUCTIONS FOR MAINTENANCE,
INSPECTION AND ASSEMBLY WORK
station will void the warranty.
• Only use original parts or parts recognised by the
manufacturer. The use of other parts may void the
manufacturer's liability for any resulting damage.
• The customer has to ensure that all maintenance,
inspection and assembly work is carried out by
and adequate study of the operating manual.
• Work on the machine is to be done only when it
is shut down. The procedure for shutting down
the machine is described in the operating manual
and is to be precisely adhered to.
harmful to health must be cleaned. Before
recommissioning, observe the commissioning
instructions (see 5. Commissioning ).
• Keep unauthorised persons (e.g. children) away
from the lifting station.
• Observe all safety instructions and instructions in
this operating (and installation) manual.
This operating manual must always be available on
operator.
1.6 RISKS AND CONSEQUENCES
COMPLIANCE WITH THE OPERATING MANUAL
Failure to comply with this operating and installation
manual will result in the loss of warranty rights and
rights to damages.
2. TRANSPORT, TEMPORARY STORAGE,
DISPOSAL
2.1 RECEIVING INSPECTION
• When receiving goods, check the condition of the lifting station's
packaging.
• In case of damage, note the exact damage and immediately notify
the dealer in writing.
2.2 TRANSPORT
DANGER
Dropping the pumping station.
Keep the pumping station horizontal when moving it.
Observe the indicated weight.
Never suspend the pumping station by the power cord.
Use suitable means of transport.
• Always transport the lifting station in a horizontal position.
• Choose suitable means of transport.
Sanicubic 1 GR SE71.1 S
Sanicubic 1 GR SE71.1 T
Sanicubic 1 GR SE71.2 T
Sanicubic 1 GR SE71.3 T
Sanicubic 1 GR SE71.4 T
17
OF
GROSS WEIGHT TOTAL WEIGHT OF THE PALLET
64 kg
80 kg
68 kg
EN
NON-