Publicité
Les langues disponibles
Les langues disponibles
The recording speed is 1:1 and according to the actual plying time of the CD track
-
The recording format is preset at – MP3 bit rate : 128 kbps, sampling rate : 44.1khz
-
Press " stop
" button (3) to interrupt the recording mode at anytime.
-
B) Copying of MP3 file
If putting a MP3 disc instead of a CD-disc, the system will copy the files to the USB if press the "
operation procedures is same as CD encoding as stipulate on above, and the system will switch to copying mode only if MP3 file
being read.
C) DAB/FM encoding
Operate tuner mode refer above listening to radio section to receive the station you would like to encode.
1.
Press the "
2.
After finish of recoding, press" stop
3.
D) Cassette/Phono/AUX-in/Bluetooth® encoding
Plug in the USB pen drive for recording (make sure it had enough empty space).
1)
Set the unit to your desired encoding mode by function button (10) such as "tape" mode or "phono/aux-in" or
2)
"Bluetooth®"...etc. then press the "
The LCD display (2) will flash with "REC USB" icon.
3)
Start playback the track of cassette tape or your external Aux device or Bluetooth® device that you prepare to encoding to
4)
MP3 format. Now the system is starting the encoding mode.
After finishing of recoding, press "stop
5)
Remark:
After setting the encoding mode (step 2):
-
If USB is connected to the unit during encoding, the LCD display (2) will have "Check USB" (with "USB" flashing)
I.
after pressing once of the "
Press Skip Up
II.
Press the "
III.
Continue step 4 of the above operation
IV.
Encoding bitrate (by remote handset, "tape" mode, "phono/aux-in" or "Bluetooth®" only).
V.
You can select the desired bitrate during encoding, the higher bit rate will generate
Better sound quality and occupy more space of memory. The selectable range is from 32 - 256 kbps respectively
1. Set in "tape" mode or "phono/aux-in" or "Bluetooth®") function (10) & remain stop mode.
2. Press the " Info " function and the LCD display will show the default bitrate (128Kbps)
3. Press Skip Up
4. Press again the " Info " to confirm the setting.
E) track separation(On remote control only)
You can divide the recording music from tape or DAB...etc in to USB track by track during encoding. Every time when press the
"
" (track separation) button (on remote control) once during encoding from tape or Aux in, the system will generate a new
track and continuous the recording. The text " SAVE " at LCD display will flashing one time, it mean the unit is creating a new
track successfully.
File delete at USB (by remote control)
The system is able to erase the file stored inside the USB pen drive by following:-
1． Insert the media storage and set at " USB " mode.
2． Press the " delete " button and the LCD display (2) will show (del ---001)
3． Press skip forward
4． Press the " delete " button to enter " yes / no " mode and then press skip forward
" or " no ".
5． Press the " delete " button again to confirm the setting.
Remark :
Press " stop " button once at remote handset to quite delete mode
-
Phono
" button twice (4) until the unit will display flashing with "REC USB " icon. Encoding is now performing.
" button (3) until the symbol " REC USB " disappear.
" button (4) twice.
" button (3) until the "REC USB" disappear.
" button (4).
or Skip Down
" button (4) again to confirm the recording media.
or Skip Down
or skip backward
button to select the file going to delete
button (23/13) to select the desired media (USB) for recording.
button (23/13) to select the desire bitrate for encoding.
7
MCD5550 / English Instruction Manual
or skip backward
" button (4). The
to select " yes
Publicité
