Publicité
Les langues disponibles
Les langues disponibles
B. Timer clock setting (on remote control only)
This function allows the system to turn on automatically and wake you up by CD, DAB, FM Radio, USB mode respectively.
First, set the unit at standby mode and then press & hold the " Timer " button on the remote control to enter the setting mode, the
LCD display will show "SET TIMER" then change to " SELECT SOURCE and timer "
1) Wake up source
press the " Function " button repeatedly to select the source from " CD " -- " FM " -- "DAB "-- " USB ".
Press " Timer " button to confirm the selected source.
2) Wake up volume
press the Skip up
to confirm the wake up level.
3) Wake up time
press Skip up
Press Skip up
Remark
➢
If there is no music source being detected (such as USB/CD) when the preset time is reached, system will default to FM
mode automatically.
For FM or DAB radio wake up, the system will preset at the latest radio frequency being listened before switching off.
➢
➢
Please switch off the system manually during alarm wake up mode as the system will not turn off automatically after alarm on
mode.
⚫ Active/de-active timer function
To active the timer, press once the " Timer " button on remote handset until the timer indicator "
1.
display (2).
To cancel timer function by press once again " Timer " button until the timer indicator "
2.
C. Pre-set EQ function
This unit provides 4 differences sound mode to enhance your listening experience. You can select the desired effect by pressing
the " Preset EQ " button (22) repeatedly at following sequence:-
FLAT
CLASSIC
Factory Reset
Select " DAB " mode
1.
Press & hold the " EQ " key on main unit or remote control for 5 seconds and the unit will reset to original setting
2.
automatically.
Remark
Due to ErP stage two requirement and protect the environment. The unit will switch to standby mode automatically once no any
music playing over 15 minutes.
Specification
UKW/FM
: 87.5-108 MHz
DAB: Band III
: 174.92-239.2 MHz
Bluetooth®
: 2402 - 2480 MHz (+/- 75kHz) / max. Sending effects 4 dBm
Power Supply
: AC230V~50Hz
Power consumption
: 31W
/ down
" button to adjust the wake up volume level then press "Timer" button
/ down
" button to set the hour & then press "Timer " button to enter the hours.
/ down
" button to set minutes and press " Timer " button " to store the memory.
ROCK
POP
MCD5550 / English Instruction Manual
JAZZ
9
" icon will flash on display :-
" is shown on LCD
" disappear.
Publicité
