Flat Screen Mounting - Goobay ScreenFlex Twin Mode D'emploi

4.3

Flat screen mounting

Tab. 16: Mounting the flat screen
Allen key 4mm
with screwdriver
Phillips screwdriver
1. Lean the flat screen vertically on a
A
Fig. 20: Flat screen mounting 1
Fig. 21: Flat screen mounting 2
Risk of injury by tripping and falling
>> Place, transport and install product, parts and acceo-
ries in a safe way.
Risk of material damage by improper
procedure
>> Only use moderate force when tightening the screws
in order to avoid damaging threads.
>> NEVER set the screen on the front during installation!
>> Do not damage the flat screen by too long screws.
soft, large surface or a wall and
2.
Installation is only possible with flat-back flat
screens.
3.
Therefore, the VESA hole spacings
75x75mm or 100x100mm are available.
protect it of scratches and overturn-
ing.
Dismantle the VESA plates off the
holder unit (A) by removing the
locking screws on the back side with
Allen key (P-A).
Attach the VESA plates with
r etaining lugs upwards to your flat
screens by screws (M-A) or (M-B)
and washers (M-C).
P-A
23