STORZ & BICKEL Volcano Classic Mode D'emploi page 76

Attach Valve Balloon to Filling Chamber
Only fill the Valve Balloon with the ap-
proximate amount of vapor that you
intend to use within the next 10 min-
utes. Do not overfill the Valve Balloon
(overpressure) in order to prevent the
loss of vapor. It is important to watch
the vapor density in the Valve Balloon
(see Chapter 5. "Factors influencing
Vaporization", page 58).
ok
Watch vapor density
10. S O L I D VA LV E
When the Valve Balloon is filled, switch
off the air pump and remove the Valve
Balloon with Filling Chamber. Grasp
the Valve firmly with your thumb and
index finger at the designated grip in-
dentation.
Remove Valve Balloon with Filling Chamber
Place the Filling Chamber on a heat-
proof surface, for example these Inst-
ructions for Use, and detach the Valve
Balloon from the Filling Chamber by
pressing the grippers together. The
Valve closes automatically so that the
vapors in the Valve Balloon cannot es-
cape.
76