VOLTCRAFT VC 260 Mode D'emploi page 26

All manuals and user guides at all-guides.com
Introduction
Dear Customer,
In purchasing this Voltcraft® product, you have made a very good
decision for which we should like to thank you.
You have acquired an above-average quality product from a brand
family which has distinguished itself in the field of measuring, char-
ging and network technology by particular competence and perma-
nent innovation. With Voltcraft®, you will be able to cope even with
difficult tasks as an ambitious hobbyist just as much as a professio-
nal user. Voltcraft® offers you reliable technology at an extraordina-
rily favourable cost-performance ratio. We are certain: Your start
with Voltcraft will at the same time be the commencement of a long
and profitable co-operation. We wish you much enjoyment with
your new Voltcraft® product!
By purchasing the Digital Multimeter VC 260 you have acquired an
3
environmental-friendly 3 / digit state-of-the-art measuring instru-
4
ment. This device is environmental-friendly, because it uses a capa-
citor with a capacity of 20F instead of batteries or accumulators for
power supply. The capacitor is buffered via the solar cell and rechar-
ged by 9 to 12V DC or AC or by 230V AC. Then, the measuring
cables are used as the charging cables. The change from one mea-
suring range to the next higher or lower one is performed automati-
cally (auto range).
The measuring instrument and lines are tested for their safety
according to EN61010-1:2001 (=DIN VDE 411/part 1) or EN61010-
2-31. Moreover, they are EMC tested and meet the requirements
of applicable European and national regulations. The conformity
has been proved.
The corresponding declarations and documents have been
deposited with the manufacturer.
To maintain the specifications and to ensure risk-free operation, the
user should comply with the following operating instructions!
26