Télécharger Imprimer la page

Weller WD 3M Manuel D'instructions page 31

Publicité

Les langues disponibles

Les langues disponibles

WD 3M
All manuals and user guides at all-guides.com
Switching locking function on/off
After the lock is switched on, only the temperature buttons ┌ 1 ┐,
┌ 2 ┐ and ┌ 3 ┐, ECO and
┌ 1·2·3 ┐ can now be operated at the repair station. All other settings
are disabled until the repair station is unlocked again.
To lock the repair station:
1. Select the menu item LOCK in Menu 1.
"OFF" appears in the display. The lock symbol flashes.
Note
If the ┌ 1 ┐ or ┌ 2 ┐ buttons are pressed while "OFF" is displayed,
you will exit the menu item without the locking code being saved.
2. Set a 3-digit lock code with the UP or DOWN button.
3. Press button ┌ 3 ┐ for 5 seconds.
The code is stored. The lock symbol is displayed. The station is
now locked. The display switches to the main menu.
To unlock the repair station:
1. Select the menu item LOCK in Menu 1.
"ON" appears in the display. The lock symbol is displayed.
2. Enter the 3-digit lock code with the UP or DOWN button.
3. Press button ┌ 3 ┐.
The station is now unlocked. The display switches to the main
menu.
7.2
Selecting Menu 2 special functions
Special functions
LEVEL
ID
FCC
SP BUTTON
AUTO CHANNEL
ECO BUTTON
HI / LO CONTROL
1. Select the desired channel ┌ 1 ┐, ┌ 2 ┐ or ┌ 3 ┐ for entering the
special functions.
2. Press the UP and DOWN buttons at the same time and hold in.
"– 2 –" appears in the display after 4 s.
3. Release the buttons.
Selection of the special functions of Menu 2 is activated.
The settings can now be made.
Use the ┌ 1 ┐ and ┌ 2 ┐ buttons to select menu items.
Exit the menu again with button ┌ 3 ┐ (EXIT).
Navigation
┌ 1 ┐
┌ 2 ┐
EXIT
┌ 3 ┐
13-18

Publicité

loading