Publicité
Les langues disponibles
Les langues disponibles
WD 3M
All manuals and user guides at all-guides.com
Setpoint and actual values are displayed in digital form. Three
temperature buttons are used to select fixed temperatures directly.
When the preselected temperature is reached, this is signalled by
the flashing visual control check (" " symbol (18) in the display and
additional green LED (2)).
The Weller WD 3M repair station has the following additional
functions:
Automatic tool detection and activation of corresponding control
parameters
Digital temperature control
Option of inputting offset values
Programmable temperature reduction (setback)
Standby and lock functions
Antistatic device design in accordance with ESD safety
Different equipotential-bonding possibilities on the device
(standard configuration)
Customer-specific calibration function
USB port for control, evaluation and documentation via PC
4.1
Technical data WD 3M
Dimensions
Weight
Mains supply voltage
Power consumption
Safety class
Fuse
Temperature control of
channels
Temperature accuracy
Temperature stability
Equipotential bonding
L x W x H (mm): 273 x 235 x 102
L x W x H (inches): 10.75 x 9.25 x 4.02
approx. 5.5 kg
230 V, 50 Hz (120 V, 60 Hz)
400 W
I and III, housing antistatic
Overcurrent release 1.5 A
Soldering iron, stepless
WP 80 / WP 120
50 °C – 450 °C (150 °F – 850 °F)
WSP 150
50 °C – 550 °C (150 °F – 950 °F)
WMRT / WMRP
100 °C – 450 °C (200 °F – 850 °F)
Controllable temperature range is
tool-dependent.
9 °C ( 17 °F)
2 °C ( 4 °F)
Via 3.5 mm switch jack socket on
device rear side.
5-18
Publicité
