Dometic Oceanair Skyscreen Powered Instructions De Montage Et De Service page 20

Operation
Key to wiring diagrams
Pos.
1
2
3
4
5
bk
rd
gr
wh
I
NOTE
• Accessories are available using the separate order form.
• Observe the applicable documents for the controls and the operating
elements.
8 Operation
A
NOTICE! Damage hazard while driving
Only for boats and yachts: If the blind is fitted beneath an open sunroof,
then the blind should be stowed when driving at more than 10 knots or with a
sea state of more than moderate, because this can damage the blind. Parts that
come loose may injure people in the vicinity.
I
NOTE
• When operating the blind using switches or an automation
system: If the movement direction is reversed too quickly, the motor might
not detect the polarity change and will just stop. To prevent this, the power
must be off for at least 0.5 seconds before the movement direction is
reversed.
• When the motor is stopped the power consumption falls. After approxi-
mately 4 minutes the motor automatically switches off.
• Only if operated by switches: When operating the blind with switches
each switch operates each blind independently.
• Only if operated with AP Remote control: When operating the blind
with an AP Remote control each fabric end is independently operated via
separate channels on the remote control. More than one blind can be added
to the same channel.
• Each blind can be stopped in any position.
20
Description
Power supply
Head rail
Head rail motor options
External receiver
Customer supplied DPDTswitch (double pole, double throw), center off,
latching or momentary, 12 Vg/24 Vg, 3 A)
Black
Red
Gray
White
Skyscreen Powered
EN