cecotec CONGA 2299 ULTRA HOME GENESIS Manuel D'instructions page 56

ENGLISH
Cleaning the dirt duct
If the light indicator is red when the dirt-disposal bag is not full, unplug and rotate the unit
to check if there is a blockage in the transparent cover. If so, remove the screws with a
screwdriver, open the transparent cover, and remove what's causing the blockage. Then,
re-screw the cover.
Maintenance
Cleaning of the infrared lens and the charge indicator. Fig. 12.
Use a clean, dry, soft cloth to wipe dust from the infrared lens and charge indicator. It is
recommended to clean them once a month.
Cleaning the fan support Fig. 13.
Check the fan filter holder for lint and dirt remains. If so, remove them with a clean, dry cloth. It
is recommended to clean it once a month.
6. TROUBLESHOOTING
Beeps while the light is red:
Beeps Error
1 Driving-wheel
fault
2 Robot's side brush
error
3 Fan error
4 Main-brush fault
Other possible scenarios:
Problem
The robot vacuum cleaner
does not activate.
56
CONGA 2299 ULTRA HOME GENESIS
Solution
Check if the driving wheel is blocked.
Check if the side brushes are blocked and clean them.
Clean the dust or objects that may be blocking the air inlet
channel.
Check if the main brush is blocked or tangled and clean it.
Solution
Make sure the battery is fully charged.
If the problem persists, reset the robot vacuum cleaner by pressing
the RESET button.