cecotec CONGA 2299 ULTRA HOME GENESIS Manuel D'instructions page 50

ENGLISH
2. BEFORE USE
- This robot vacuum cleaner includes a package designed to protect it during transport. Take
the robot vacuum cleaner out of the box. Keep the original box and other elements in a safe
place, as this will help you prevent product damage when transporting it in the future. In
case the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or in bad conditions, contact the official Cecotec Technical Support Service
immediately.
Box contents. Fig. 1.4:
Robot vacuum cleaner
1.
Self-emptying base
2.
2 side brushes
3.
Mop and mop support
4.
Connection cord
5.
Self-cleaning brush
6.
Dirt-disposal bag
7.
Mixed tank
8.
Multifunctional brush
9.
10. Instruction manual
Warnings
- Remove all objects around the robot vacuum cleaner such as clothing, papers, cables,
curtains, or other fragile objects which may block or slow down the operation of the robot
vacuum cleaner. Fig. 2
- If the room to be cleaned is near a balcony or stairs, a physical barrier must be placed to
prevent product damage and ensure safe operation. Fig. 3
- Direct exposure to sunlight or great light contrasts may affect the correct operation of the
sensors. If this happens, the robot vacuum cleaner will cease operation. Move it to a new
location for it to start running again.
3. INSTALLATION
Place the self-emptying base against a wall and leave a minimum free space of 1.5 metres
1.
to the front and 0.5 metre to each side. Fig. 4.
Plug the self-emptying base to a power socket. Wind and store the remaining cord in the
2.
bottom part of the self-emptying base to avoid accidents.
Install both side brushes in their corresponding slots, located on the bottom part of the
3.
50
CONGA 2299 ULTRA HOME GENESIS