Spiral mode
When you select this mode, the robot vacuum cleaner will intensively clean a specific spot at
maximum power. It will start cleaning at a specific spot and will move outwards in a spiral
motion (1 metre). Then, it will return to the starting spot in an inwards spiral motion again.
-
Before using this mode, place it in the spot you wish to clean.
-
When it finishes and returns to the starting point, the robot vacuum cleaner will stop at the
same point where it started cleaning.
-
To activate this mode, press the spiral cleaning button on the app.
Edge mode
-
When this mode is selected, the robot vacuum cleaner will clean along walls and around
furniture (e.g., table or chair legs).
-
Press the edge cleaning button on the app.
Back Home mode
Press the Back Home button on the robot vacuum cleaner or select the option from the app
(house icon) to send the robot vacuum cleaner to the self-emptying base. The robot vacuum
cleaner will stop vacuuming until it reaches the base.
Manual mode
Select the manual cleaning mode on the app to steer your robot vacuum cleaner manually.
Power level function
Select the power level on the app to control the robot vacuum cleaner's suction power during
cleaning. There are 3 power levels: Eco, Normal, and Turbo.
Cleaning scheduling
To make cleaning easier, the robot vacuum cleaner has a function that allows it to be
programmed daily from the app. According to the setting, the robot vacuum cleaner will
automatically start cleaning in the selected days at the desired time.
5. CLEANING AND MAINTENANCE
High-efficiency filter. Fig. 8.
-
The high-efficiency filter is designed with fibres that help trap dust particles, dust mites,
pollen... It is very important to periodically clean the filter, to avoid these particles from
building up in the filter, causing efficiency loss. It is convenient to carry out this maintenance
once a week.
-
It is recommended to replace the high-efficiency filter with a new one without exceeding
160 cleaning hours.
CONGA 2299 ULTRA HOME GENESIS
ENGLISH
53