cecotec CONGA 2299 ULTRA HOME GENESIS Manuel D'instructions page 51

Masquer les pouces Voir aussi pour CONGA 2299 ULTRA HOME GENESIS:

Les langues disponibles

robot vacuum cleaner. Press until it clicks to make sure they are properly fixed. Fig. 5

Connect the robot vacuum cleaner to the self-emptying base and make sure the charging

terminals on the robot match those of the base. Once the robot vacuum cleaner is properly

placed, it will beep once, and the light indicator will come on. If the light is flashing, it

means the battery is not completely charged. To ensure the maximum cleaning time, wait

until the light turns steady, as this will indicate the battery is fully charged and the robot

vacuum cleaner is ready to clean. Fig. 6.

Information on the self-emptying base

The self-emptying base includes a loading and emptying function and a new dirt-

disposal bag. After cleaning, the robot will automatically return to the self-emptying

base to recharge. The self-emptying base will empty the dirt tank based on the emptying

scheduled selected on the app.

If the robot vacuum cleaner is charging in the self-emptying base, you can force the robot

to self-empty by pressing the Back Home button–the self-emptying base will empty the

dirt tank.

4. OPERATION

Starting the cleaning

Hold down the Start/Pause button on the robot vacuum cleaner to turn it on.

Press the Start/Pause button on the robot vacuum cleaner or on the app to start cleaning.

Note

If the robot vacuum cleaner runs out of battery while cleaning, it will automatically return

to the self-emptying base. Once the battery is fully charged, the robot can start a new

cleaning cycle.

The robot vacuum cleaner will not be able to return to the self-emptying base if it can't

easily access it. If this happens, manually place it in the self-emptying base.

Pausing the cleaning

Press the Start/Pause button on the robot vacuum cleaner or on the app to pause the

cleaning process.

Press the Start/Pause button on the robot vacuum cleaner or on the app to resume the

cleaning process.

Back to the self-emptying base

Press the Back Home button on the robot vacuum cleaner or select the option from the app

(house icon) to send the robot vacuum cleaner to the self-emptying base. The robot vacuum

cleaner will stop vacuuming until it reaches the base.

CONGA 2299 ULTRA HOME GENESIS

ENGLISH