Bosch GCM12SD Consignes D'utilisation/De Sécurité page 44

2610051827 GCM12SD 08-18.qxp_GCM12SD 9/19/18 2:52 PM Page 44
• A "bevel cut" is a cross-cut made with the blade perpendicular to the fence and with the table
set at 0° miter. The blade can be tilted to any angle within the saw's range: the left is 0 to 47°
and the right is 0 to 47°.
• The bevel scale is sized and positioned for easy reading – see Figure 48.
Fig. 48
"30" positions are for
cutting 45° "spring angle"
crown molding flat on table
Note: when performing right and left bevel cuts it is necessary to move the sliding fence away
from the blade to avoid cutting into the fence. When compound cutting on the right it will be
necessary to remove the right siding fence – see page 34.
44
.800.544.2843
BEVEL SCALE INFORMATION
Watch While Tilting to Right
www.calcert.com
15
10 20
5 25
30
0
Saw Operations
Bevel Cuts
What's a Bevel Cut?
Watch While Tilting to Left
"33.9" positions are for cutting 38° "spring angle"
crown molding flat on table
Note: Saw has a 33.9 detent feature to automatically
hold it at this bevel angle setting
sales@calcert.com