Whirlpool W9 MD260 BSS Manuel Du Propriétaire page 6

to remove any possible odours.
Remove any protective cardboard or transparent
film from the oven and remove any accessories from
inside it.
Heat the oven to 200 °C, ideally using the "Fast preheat"
DAILY USE
1. SELECT A FUNCTION
• To switch on the oven, press
anywhere on the screen.
The display allows you to choose between Manual
and 6 Sense Functions.
th
• Tap the main function you require to access the
corresponding menu.
• Scroll up or down to explore the list.
• Select the function you require by tapping it.
2. SET MANUAL FUNCTIONS
After having selected the function you require, you
can change its settings. The display will show the
settings that can be changed.
POWER / TEMPERATURE
• Scroll through the suggested values and select the
one you require.
In "Forced Air" function, you can tap
preheating.
DURATION
In microwave and microwave-combinated functions,
you always have to set a cook time.
• Tap the relevant numbers to set the cooking time.
you require.
• Tap "NEXT" to confirm.
At the end of the cooking time, the cooking is
stopped automatically.
In not-microwave functions, you do not have to set
the cooking time if you want to manage cooking
manually.
• To start setting the duration, tap "Set Cook Time".
To cancel a set duration during cooking and so manage
manually the end of cooking, tap the duration value and then
select "STOP".
3. SET 6 SENSE FUNCTIONS
th
The 6th Sense functions enable you to prepare a wide
variety of dishes, choosing from those shown in the
list. Most cooking settings are automatically selected
by the appliance in order to achieve the best results.
• Choose a cooking type from the list.
• Select a function.
Functions are displayed by food categories in the 6
FOOD menu (see relative tables) and by recipe features in the
LIFESTYLE menu.
• Once you have selected a function, simply indicate
the characteristic of the food (quantity, weight,
etc.) you want to cook to achieve the perfect
result.
6
function .
It is advisable to air the room after using the appliance for the
first time.
4. SET START TIME DELAY
or touch Before starting a no-microwave function, you can
delay the cooking: The function will start at the time
you select in advance.
• Tap "DELAY" to set the start time time you require.
• Once you have set the required delay, tap "START
• Place the food in the oven and close the door: The
To program a delayed cooking start time the oven preheating
phase must be disabled: The oven will reach the temperature
you required gradually, meaning that cooking times will be
slightly longer than those listed in the cooking table.
• To activate the function immediately, and cancel
5. START THE FUNCTION
to activate
• Once you have configured the settings, tap
If the oven is hot and the function requires a specific
maximum temperature, a message will shown on the display.
In microwave functions is provided a start protection.
The door must be opened and closed before starting
the function.
• Open the door.
• Place food inside the oven and close the door.
• Tap "START".
You can change the values that have been set at any time
during cooking by tapping the value you want to amend.
• Press
6. JET START
On Home Screen bottom there is a bar which shows
three different duration. Tap one of them to start
cooking with the microwave function set at full power
(1000 W).
• Open the door.
• Place food inside the oven and close the door.
• Tap the cook time you want to cook.
SENSE
th
DELAY" to start the waiting time.
function will start automatically after the period of
time that has been calculated.
the programmed delay time, tap
"START" to activate the function.
to stop the active function at any time.
.