Swegon CIRCULAR DAMPER Installation Instructions page 3

6. Damper cable installation
Unit with electrical banner
Unit without electrical banner | without external
electrical box
Unit without electrical banner | with external
electrical box
4
MULTI.CTc.230725
Control box
Control box
We reserve the right to alter specifications.
7. Fixation tools
To prevent cable movement, we recommend securing the
cables on the unit using fastener mounts, fasteners and
self-drilling screws (not supplied).
Fastener mount Fastener Self-drillingcrews
8. Main board
In addition to installing and connecting the option, configure the unit's option using the commissioning manual.
We reserve the right to alter specifications.
MULTI.CTc.230725
1(Black) = GND
2(Red) = DO5/6
Control board
5