Changing The Oven Light Bulb - Zanussi ZOB9990X Notice D'utilisation

3172746-000 In-Fr ZANUSSI 03/07/14 11:20 Página 16
CAUTION
Do not remove the safety pins at any time since
the hinge is taut and may cause injury. It would
also be impossible to mount the door without the
pins being in place.
To mount the door, hold it with both hands and insert
the hinges in the appropriate openings in the front of
the oven. Slowly open the door until it is fully open.
Cleaning the Large Inner
CAUTION
Be very careful when removing the inner glass,
as the oven door will close.
Instructions to remove / replace inside glass
panels. 90 cm oven
1
Open the oven door.
1
3 Squeeze point 1
located on the upper part
of both sides of the oven
door.
• The inside glass panels will now be loose and can
be easily cleaned with window cleaning liquid and a
soft cloth.
16
2
Fully rotate the two
clamps (N) to stop the
door from closing.
1
4 Continue squeezing
point 1 and pull out the
upper clasp of the door.
WARNING
If the door has not been blocked with the clamp
(N), please take care when removing the inside
glass panels as the oven door will close.
6 Once clean, return the glass panels in the same
order so that the word TERMOGLASS can be read.
7 Replace the upper clasp of the door, making sure
that the side tabs fit in point 1.

Changing the Oven Light bulb

CAUTION
First make sure the oven is unplugged before
proceeding to change the bulb.
WARNING
Ensure that the appliance is switched off before
replacing the lamp to avoid the possibility of
electric shock.
The replacement bulb must be resistant to temperatures
up to 300ºC. You can order one from the Technical
Assistance Service.
1
Loosen the lens from
the lampholder with the
help of the appropriate
tool.
2
Exchange the bulb.
Replace the lens, making
sure it fits in the correct
position without forcing
it.
www.zanussi.com