Publicité
FEATURES
The PF-6 is an electronic device used for air inlet control in livestock
buildings. In combination with an environment controller, the PF-6
coordinates the movement of the air inlets with the operation of the fans
using a potentiometer located on the panel drive. Additional units can be
connected to the PF-6 for an independent control of additional air inlets.
The main features of the PF-6 are as follows:
DIGITAL DISPLAY
A digital display shows the operation parameters and alarm messages.
PILOT LIGHTS
Pilot lights indicating the state of outputs allow you to monitor the
operation of the system from a distance.
ALARM OUTPUT
The controller generates an output signal that will activate any alarm
system in the case of various operation problems.
HYSTERESIS
A hysteresis prevents the air inlet panels from oscillating around the
desired position when small variations in fan speed occur.
PERMANENT MEMORY
Settings are retained in memory even in the event of a power failure.
OVERLOAD AND OVERVOLTAGE PROTECTION
Fuses located at the input and outputs of the controller protect its
circuitry in the case of an overload or overvoltage.
COMPUTER CONNECTION
A computer can be connected to the PF-6 to centralize information
management and provide monitoring and datalogging possibilities.
4
PF-6.rev.14
Publicité
