Publicité
PF-6
ALARMS - HIGH
This function is used to adjust the
offset for the high temperature
alarm. The alarm contact is
activated when the room
temperature
"temperature set point + high
alarm offset" as shown below.
The offset can be adjusted from
0.5°F to 40°F (0.3°C to
22.2°C). Note that internal switch #4 must be set to ON for this alarm to
be detected. This function is not available during calibration.
High Offset
Set Point
Settings
The high alarm offset is displayed, alternating with the letters
"Hi"
Use the adjustment knob to adjust the offset to the desired
value.
28
PF-6.rev.14
exceeds
T°
HighTemperature Alarm
Time
Publicité
