Publicité
OVER-OPENING SETTING
The over-opening bandwidth is
used to open the air inlet further
when the last reference point
temperature has bean reached.
It can be adjusted from 0.5 to
20°F (0.3 to 11.1°C). Note that
this function is not available dur-
ing calibration.
Temperature
Set Point
Settings
The bandwidth is displayed, alternating with the letters "BD".
Use the adjustment knob to adjust the bandwidth to the desired
value.
Last Stage
Inlet Opening
CONTROLLER STAGES
Over-opening
Inlet Opening
OVER-OPENING
BANDWIDTH
PF-6
Room
Temperature
PF-6.rev.14
25
Publicité
