Automated Production PF-6 Mode D'emploi page 16

PF-6
The other steps follow according to the ventilation curve. A step is
added each time a new stage is activated by the temperature controller.
Figure 2 below shows an example of this.
Figure 2 Ventilation Curve with Constant-Speed Stages Only
Ventilation
Stage 2
Stage 1
This example has two constant-speed ventilation stages. Step 1
corresponds to the activation of the first ventilation stage at
" temperature set point + differential 1 ". Step 2 corresponds to the
activation of the second ventilation stage at " temperature set point +
differential 1 + differential 2 ".
16
PF-6.rev.14
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
Step 0
0.4 F
o
DIFFERENTIAL
(0.2 C)
o
STAGE 1
Temperature
Set Point
○ ○ ○ ○ ○ ○
Step 1
DIFFERENTIAL
STAGE 2
Step 2
Room
Temperature