Publicité
ALARMS - LOW
This function is used to adjust
the offset for the low
temperature alarm. The alarm
contact is activated when the
room temperature drops below
"temperature set point- low
alarm alarm offset" as shown
below. The offset can be
adjusted from 0.5°F to 20°F (0.3°C to 11.1°C). Note that internal switch
#4 must be set to ON for this alarm to be detected. This function is not
available during calibration.
Set point
Low offset
Settings
The low alarm offset is displayed, alternating with the letters
"Lo"
Use the adjustment knob to adjust the offset to the desired
value.
T°
Low temperature alarm
PF-6
Time
PF-6.rev.14
29
Publicité
