Publicité
Les langues disponibles
Les langues disponibles
Never straighten or weld damaged cutting tools.
– Operate the Petrol Brush Cutter with as little noise and contamination as
possible. In particular check the correct setting of the carburetor.
– Clean the Petrol Brush Cutter at regular intervals and check that all screws
and nuts are well tightened.
– Never service or store the Petrol Brush Cutter in the vicinity of naked flames.
– Always store the Petrol Brush Cutter in locked rooms and with an emptied fuel
tank.
Observe the relevant accident prevention instructions issued by the relevant trade associations and by the insurance companies.
Do not perform any modifications on the Petrol Brush Cutter as this will endanger your safety.
The performance of maintenance or repair work by the user is limited to those activities as described in the instruction manual. All other work is
to be done by an Authorized Service Agent. Use only genuine spare parts and accessories released and supplied by MAKITA.
Use of non-approved accessories and tools means increased risk of accidents.
MAKITA will not accept any liability for accidents or damage caused by the use of non-approved cutting tools and fixing devices of cutting tools, or
accessories.
First Aid
In case of accident make sure that a first-aid box is available in the vicinity of the
cutting operations. Immediately replace any item taken from the first aid box.
When asking for help, please give the following information:
– Place of accident
– What happened
– Number of injured persons
– Kind of injuries
– Your name
Packaging
The MAKITA Petrol Brush Cutter will be delivered in two protective cardboard
boxes to prevent transport damage. Cardboard is a basic raw material and is
therefore consequently reusable or suitable for recycling (waste paper
recycling).
All manuals and user guides at all-guides.com
6
Publicité
