Publicité
Les langues disponibles
Les langues disponibles
SAFETY INSTRUCTIONS
General Instructions
– To ensure correct operation, user has to read this instruction manual to make
himself familiar with the handling of the Petrol Brush Cutter. Users
insufficiently informed will risk danger to themselves as well as others due to
improper handling.
– It is recommended only to lend the Petrol Brush Cutter to people who have
proven to be experienced with Petrol Brush Cutter.
Always hand over the instruction manual.
– First users should ask the dealer for basic instructions to familiarize oneself
with the handling of an engine powered cutter.
– Children and young persons aged under 18 years must not be allowed to
operate the Petrol Brush Cutter. Persons over the age of 16 years may
however use the device for the purpose of being trained only whilst under
supervision of a qualified trainer.
– Use Petrol Brush Cutter with the utmost care and attention.
– Operate the Petrol Brush Cutter only if you are in good physical condition.
Perform all work calmly and carefully. The user has to accept liability for
others.
– Never use the Petrol Brush Cutter after consumption of alcohol or drugs, or if
feeling tired or ill.
Intended use of the machine
– The Petrol Brush Cutter is only intended for cutter grass, weeds, Bushes,
undergrowth it should not be used for any other purpose such as Edging or
hedge cutting as this may cause injury.
Personal protective equipment
– The clothing worn should be functional and appropriate, i.e. it should be
tight-fitting but not cause hindrance. Do not wear either jewelry or clothing
which could become entangled with bushes or shrubs.
– In order to avoid either head-, eye-, hand-or foot injuries as well as to protect
your hearing the following protective equipment and protective clothing must
be used during operation of the Petrol Brush Cutter.
– Always wear a helmet where there is a risk of falling objects. The protective
helmet (1) is to be checked at regular intervals for damage and is to be
replaced at the latest after 5 years. Use only approved protective helmets.
– The visor (2) of the helmet (or alternatively goggles) protects the face from
flying debris and stones. During operation of the Petrol Brush Cutter always
wear goggles, or a visor to prevent eye injuries.
– Wear adequate noise protection equipment to avoid hearing impairment (ear
muffs (3), ear plugs etc.).
– The work overalls (4) protect against flying stones and debris.
We strongly recommend that the user wears work overalls.
– Special gloves (5) made of thick leather are part of the prescribed equipment
and must always be worn during operation of the Petrol Brush Cutter.
– When using the Petrol Brush Cutter, always wear sturdy shoes (6) with a
non-slip sole. This protects against injuries and ensures a good footing.
Starting up the Petrol Brush Cutter
– Please make sure that there are no children or other people within a working
range of 15 meters (50ft), also pay attention to any animals in the working
vicinity.
– Before use always check that the Petrol Brush Cutter is safe for operation:
Check the security of the cutting tool, the control lever for easy action and
check for proper functioning of the control lever lock.
– Rotation of the cutting tool during idling speed is not allowed. Check with
your dealer for adjustment if in doubt. Check for clean and dry handles and
test the function of the start/stop switch.
All manuals and user guides at all-guides.com
3
(1)
(2)
(4)
(5)
Diagrammatic figure
(3)
(6)
Publicité
