Features - Sony LMD-151MD Mode D'emploi

Features

Compliance of medical safety standards in
America, Canada and Europe
UL2601-1 for America, CSA C22.2 No.601.1 for
Canada and EN 60 601-1 for Europe have been
obtained for this monitor.
The monitor is designed for medical use, with the
sheet switch, screen protect panel, etc. built in for easy
maintenance.
Accepts various input signals
Accepts analogue computer input signals
Adopting the scan converter allows this monitor to
detect VGA, SVGA, XGA and SXGA (only LMD-
181MD) signals and display suitable pictures.
Optional slot for the video signal
An optional input adaptor can be attached. The
composite and Y/C, component, analog and SDI signal
can be input depending on the input connectors of the
board to be used.
Multi-format
When an optional input adaptor is installed, NTSC or
PAL color system or DTV format, such as 720P,
1080I, etc. can be selected automatically.
High-quality LCD panel
Because the monitor uses high brightness, high
resolution and ultra-wide viewing angle technology,
the monitor can be used under various lighting
conditions and in numerous ways (hanging on the wall,
several ways of monitoring the picture, etc.).
Because a color filter with wide-color reproduction
and LCD materials with high response speed are used,
the motion picture of the video signal is displayed
clearer.
Functions
APA function
You can display pictures from the computer at the
appropriate position and in the appropriate size by
simply pressing the APA key.
6
(GB)
Select color temperature and gamma mode
You can select the color temperature from among two
(high and low) settings and gamma mode from among
five settings.
Over scan function
You can select the display from among 0%/5%/10%
over scan mode when the video signal is input.
Aspect setting
You can set the monitor to 4:3 or 16:9 display mode
according to the input signal.
Select language display
You can select your language for the display from
seven languages - Japanese, English, French, German,
Italian, Spanish and Chinese.
Stereo speaker
The stereo speaker and amplifier are built in for
monitoring the sound.
Power saving function
The monitor enters into power saving mode to reduce
the power consumption when no signal is input.
Key inhibit function
You can inhibit the key to prevent missing an
operation.
Two kinds of ground terminals
Two kinds of ground terminals are built into the
monitor to equal the electric potential.
External remote control function
You can directly select the input signal, aspect, etc. by
operating the equipment connected to the PARALLEL
REMOTE terminal.
Others
VESA (Video Electronics Standard
Association) mount system
You can install the monitor to a wall or ceiling by
adopting the VESA mount system. 100 × 100 mm (4 ×
4 inches) pitch screw holes are equipped on the rear
panel.
Optional stand
It is more convenient to install the monitor on a desk
by using the optional stand (SU-557).