Publicité
Les langues disponibles
Les langues disponibles
described in this manual to get to know
your normal blood pressure. Regular
readings give a more comprehensive blood
pressure history. Be sure to note date and
time when recording your blood pressure.
Consult your doctor to interpret your blood
pressure data.
Problem
Nothing
Batteries are drained.
appears on the
display, even
Battery terminals are not
when the power
in the correct position.
is turned on.
Battery voltage is too low.
The cuff does
blinks. [ If the batteries are
not inflate.
drained completely, the
mark does not appear.]
The cuff is not fastened
properly.
You moved your arm or
body during the
The device does
measurement.
not measure.
Readings are
The cuff position is not
too high or too
correct.
low.
The value is different
from that measured at a
clinic or doctor's office.
Other
Note: If the actions described above do not solve the problem, contact the
dealer. Do not attempt to open or repair this product, as any attempt to
do so will make your warranty invalid.
All manuals and user guides at all-guides.com
Troubleshooting
Possible Reason
(LOW BATTERY mark)
English 14
Recommended Action
Replace all batteries with new
ones.
Reinstall the batteries with
negative and positive terminals
matching those indicated on the
battery compartment.
Replace all batteries with new
ones.
Fasten the cuff correctly.
Make sure you remain very still
and quiet during the
measurement.
Sit comfortably and still.
Raise your hand so that the cuff
is at the same level as your heart.
If you have a very weak or
irregular heat beat, the device
may have difficulty in determining
your blood pressure.
Refer to "Why measure blood
pressure at home".
Remove the batteries. Place
them back properly and try the
measurement again.
Publicité
