Publicité
Les langues disponibles
Les langues disponibles
ENGLISH
OPERATORS ISTRUCTIONS
CONNECT THE DEVICE ONLY TO AUTOCLAVES COMPATIBLE WITH THAT UNIT.
ALWAYS INSTALL A TAP UPSTREAM OF THE DEMINERALIZATION CIRCUIT IN ORDER
TO AVOID FLOODS;
AT THE END OF THE DAY OR WHEN THE AUTOCLAVE IS NOT GOING TO BE USED
FOR SOME DAYS, CLOSE THE TAP INSTALLED UPSTREAM OF THE DEVICE
CONNECTING THE DEVICE TO THE HOT WATER LINE IS STRICTLY FORBIDDEN!
THE DEVICE CAN BE MOUNTED TO THE WALL OR CAN BE SUPPORTED ON A
SURFACE.
THERE IS NO MINIMUM CAPACITY. THE MAXIMUM CAPACITY IS 12 l/h
MAXIMUM AND MINIMUM PRESSURE FOR WATER CLEAN OPERATION: from 2 to 7
bar
USE OF THE DEVICE IS GRENTED WITH MAX HARDNESS OF THE INCOMING WATER
OF 200 °F.
OUTPUT CONDUCTIVITY VALUE: < 15 µS (Micro Siemens); THE INPUT HARDNESS IS
IRRELEVANT.
THE MEMBRANE AND RESINS NEUTRALIZE ALL KINDS OF ORGANIC AND INORGANIC
SALT.
THE CARTRIDGES MUST BE HANDLED WITH NORMAL PRECAUTIONS. THE USE OF
PROTECTIVE GLOVES IS MANDATORY
THE FILTERING CARTRIDGES MUST BE DISPOSED OF AS SPECIAL WASTE
INSTALL THE DEVICE WITHIN 1,5 METRE OF THE AUTOCLAVE
DO NOT EXPOSE THE DEVICE THE WATER CLEAN TO FROST
DO NOT INSTALL NEAR SOURCES OF HEAT
DO NOT INSTALL UNDER OTHER TAPS
14
Publicité
