Tecno-gaz PURA Plus Mode D'emploi page 35

Hydraulic specifications:
Flow rate with supply pressure of 3.4 bar 12l/h (T= 20° and C=560 μS)
Maximum and
pressure
Conductivity value of the water supplied
by the device
Maximum installation distance between
the device and the autoclave
Salts neutralized by the resins
The graph refers to a supply of water with conductivity of 560 S/cm
The hardness of the incoming water determines the life of the cartridge and
therefore the number of litres delivered.
minimum plumbing
Production at 20 °C and 560 µS
Pressure (bar)
(2 to 7) bar
< 15 µS
2 m
Type organic and inorganic
9
ENGLISH