Zipper Maschinen ZI-EWB500 Mode D'emploi page 26

13.1 Operation instructions
Unplug battery before all maintenance and settings!
• Never remove the battery while the machine is running.
• In case of longer standstill, press the shut-down button.
Use the electric motor only with sufficient battery charge.
•
13.2 Operation
13.2.1 Start electrical support
13.2.2 Stopping the machine
13.3 Charger
Charging the battery:
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
WAR N I N G
N O TI C E
1. Set the ON-OFF switch (1) on the battery box
system to "I" = ON.
2. Press the red button (2).
3. Turn the lever (3) on the control element to
set the electrical support; the further the
control lever is pressed down, the more elec-
trical support is provided.
1. Turn the lever (1) back to the home position
to switch off the electrical support.
2. Press the red button (2).
3. Set the ON-OFF switch (3) on the battery box
system to "O" = OFF.
1. Connect the charger to the power supply
(AC outlet) 230 V / 50 Hz and the charger
plug (1) at the battery box system.
2. Charge the battery as long as the red LED (2)
lights up.
OPERATION
26