Zipper Maschinen ZI-EWB500 Mode D'emploi page 24

ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
3. Step
Assemble the support (1) to the handles (L, R)
using one hex screw (2), 2 washers (3), and one
nut (4) each.
4. Step
Fasten the cable (1) of the motor wheel to the
frame (2) using cable ties (3).
Fasten the cable (4) to the right handle (R) us-
ing cable ties (3).
5. Step
Install the battery box system (2) at the holes (1)
provided for this purpose on the tray.
Fix the battery box system (2) with one round-
headed screw (3), one washer (4), one spring
washer (5) and one nut (6) each.
ASSEMBLY
24