Publicité
Les langues disponibles
Les langues disponibles
Remove tool keys and other setting tools before switching on the machine.
•
Check the machine's connections for strength before each use.
•
Never leave the running machine unattended. Switch off the machine before leaving the work-
•
ing area and secure it against unintentional or unauthorized restarting.
The machine may only be operated, maintained or repaired by persons who are familiar and
•
who have been informed about the dangers arising from this work.
Ensure that unauthorized persons keep a safety distance from the machine and keep children
•
away from the machine.
Wear suitable work clothing and footwear.
•
Always work with care and the necessary caution and never use excessive force.
•
Shut down the machine and disconnect it from the power supply, before adjustment, change-
•
over, cleaning, maintenance or repair work, etc. Before starting work on the machine, wait until
all tools or machine parts have come to a complete standstill and secure the machine against
unintentional restart.
•
Do not work on the machine if you are tired, not concentrated or under the influence of medi-
cation, alcohol or drugs!
11.4
Special safety instructions for this machine
•
Caution in slippery conditions - slip hazard - risk of injury. When working, wear robust and non-
slip footwear. Slides / stumble / traps are a major cause of serious injury or death.
Never use the machine when it is raining or in damp, wet areas.
•
Always use both hands to hold the machine when in use.
•
•
Before start, after failure or shock, be sure to check the machine and make sure that it is in good
condition.
•
Take special care when work near swimming pools or garden ponds.
•
Unplug battery before all maintenance and settings!
:
CHARGER
•
The charger is designed exclusively to charge the battery of this machine. Charging other bat-
teries is not permitted.
•
Never use the charger in a damp or wet environment.
•
Disconnect cable connections only by pulling the plug. Pulling on the cable could damage the
cable and plug and electrical safety would no longer be guaranteed.
•
Never use the charger if the cable, plug or the machine itself are damaged by external influ-
ences. Then take the charger to the nearest specialist workshop.
•
Do not operate the machine in close proximity to heat sources.
•
Do not use an extension cord to plug in the charging station's power supply.
•
Do not place any metal objects in the area of the charging contacts of the charger.
•
Do not open the charger. In case of failure, contact a specialist workshop.
Only use the original charger to charge the battery. If other chargers are used, defects may occur
•
or a fire might be caused.
BATTERY:
Vapors may be emitted during improper use or when using damaged batteries. These vapors
•
can irritate the respiratory tract. Inhale fresh air and consult a physician if you experience any
discomfort.
EXPLOSION HAZARD! Protect the battery from heat and fire.
•
•
Only use the battery in an ambient temperature between 0° C and +45° C.
•
HAZARD OF SHORT-CIRCUIT! For disposal, transport or storage, the battery must be packed
(plastic bag, box) or the contacts must be taped.
•
Never open the battery.
11.5
Hazard warnings
Due to the structure and construction of the machine, hazardous situations may occur which are iden-
tified in this manual as follows:
A safety instruction designed in this way indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
ZIPPER MASCHINEN GmbH
www.zipper-maschinen.at
ZI-EWB500-AKKU
D AN G E R
SAFETY
22
Publicité
