Zipper Maschinen ZI-EWB500 Mode D'emploi page 23

Such a safety instruction indicates a potentially hazardous situation which, if not avoided,
may result in serious injury or even death.
A safety instruction designed in this way indicates a potentially hazardous situation which,
if not avoided, may result in minor or moderate injury.
A safety note designed in this way indicates a potentially dangerous situation which, if not
avoided, may result in property damage.
Regardless of all safety regulations, your common sense and your appropriate technical aptitude/train-
ing are and remain the most important safety factor in the error-free operation of the machine. Safe
working depends on you!
12 ASSEMBLY
12.1 Checking delivery content
Check the delivery immediately for transport damage and missing parts. Report any damage or miss-
ing parts to your dealer or the shipping company immediately. Visible transport damage must also be
noted immediately on the delivery note in accordance with the provisions of the warranty, otherwise
the goods are deemed to have been properly accepted.
12.2 Assembly-steps
ZIPPER MASCHINEN GmbH www.zipper-maschinen.at
ZI-EWB500-AKKU
WAR N I N G
C AU TI O N
N O TI C E
N O TI C E
Do not fully tighten all screws until assembly is complete.
1. Step
Assemble the left (L) and right handle (R) to the
frame (1) using one hex screw (4), two washers
(5), one spring washer (6) and one nut (7) each.
2. Step
First disassemble the nuts (4) and washers (5)
attached to both sides of the motor wheel (1).
Install the motor wheel (1) on each side by
means of a washer (5) and a nut (4) at the frame
(2).
Note:
The wheel must be assembled so that the cable
(3) is placed on the right side.
ASSEMBLY
23