Publicité
All manuals and user guides at all-guides.com
BASIC SEWING
Straight Stitch Sewing
Machine setting
q Stitch pattern:
w Presser foot:
e Thread tension:
r Stitch length:
t Stitch width:
Starting to sew
Raise the presser foot and position the fabric next to a
seam guide line on the needle plate (5/8˝ [1.6 cm] is most
common).
Lower the needle to the point where you want to start.
Lower the presser foot and pull the threads toward the
back.
NOTE:
Draw the threads to the left when sewing with the
buttonhole foot J.
To fasten the beginning of the seam, first sew several
stitches in reverse then sew forward.
Depress the foot control.
Gently guide the fabric along a seam guide line letting
the fabric feed naturally.
Do not place fingers near the presser foot when
guiding fabric, or the needle clamp screw may strike
and injure your fingers.
Finishing sewing
To fasten the ends of a seam, press the reverse stitch
control and sew several reverse stitches.
Raise the presser foot. Remove the fabric, draw the
threads to the back and cut them with the thread cutter.
The threads are now the proper length to begin sewing
the next seam.
To Change Sewing Direction
Stop the machine and turn the handwheel toward you to
bring the needle down into the fabric.
Raise the presser foot.
Pivot the fabric around the needle to change sewing
direction as desired. Lower the presser foot and continue
sewing.
34
A or B
Zigzag foot A
2 - 6
1.5 - 4
0 or 5
CAUTION:
Publicité
