Table des Matières
Publicité
320
Appendice C: MIDI
2.8.3.20 Parameter request (Function call: attribute)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call
ADDRESS
00010100 14
attribute
0000ffff 0f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX
11110111 F7
2.8.3.21 Parameter change (Function call response:
attribute)
Transmission
When an attribute is modified as a result of receiving a parameter change from
Studio Manager, the result of execution will be transmitted as the following pa-
rameter change.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call
ADDRESS
01010100 54
attribute
0000ffff 0f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
result HH
DATA
0eeeeeee ee
result HL
0eeeeeee ee
result LH
0eeeeeee ee
result LL
0eeeeeee ee
End of exclusive
EOX
11110111 F7
2.8.3.22 Parameter change
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, the patch link data of the specified scene will be modified.
Transmission
In response to a request, a Parameter Change message will be transmitted on the
[Rx CH].
If [Parameter change ECHO] is ON, this message will be retransmitted without
change.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call
ADDRESS
00010100 14
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
inpatch
DATA
0iiiiiii ih
0iiiiiii il
outpatch
0ooooooo oh
0ooooooo ol
End of exclusive
EOX
11110111 F7
function
SCENE LIB LINK
0x20
01V96—Mode d'emploi
(Function call: link)
number
0-99(0:response only)
2.8.3.23 Parameter request
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, a Parameter Change message will be transmitted on the
[Rx CH].
Refer to the above table for the Functions and Numbers.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0011nnnn 3n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call
ADDRESS
00010100 14
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
End of exclusive
EOX
11110111 F7
2.8.3.24 Parameter change (Function call response: link)
Transmission
When link data is modified as a result of receiving a parameter change from Stu-
dio Manager, the result of execution will be transmitted as the following para-
meter change.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call
ADDRESS
01010100 54
link
0010ffff 2f
number High
0mmmmmmm mh
number Low
0mmmmmmm ml
result HH
DATA
0eeeeeee ee
result HL
0eeeeeee ee
result LH
0eeeeeee ee
result LL
0eeeeeee ee
End of exclusive
EOX
11110111 F7
2.8.3.25 Parameter change (Function call: pair, copy)
Reception
This is received if [Parameter change RX] is ON and the [Rx CH] matches the
device number included in the SUB STATUS. This is echoed if [Parameter
change ECHO] is ON.
When this is received, pairing will be enabled/disabled for the specified channel.
System exclusive message
STATUS
11110000 F0
Manufacture's ID number (YAMAHA)
ID No.
01000011 43
n=0-15 (Device number=MIDI Channel)
SUB STATUS 0001nnnn 1n
MODEL ID (digital mixer)
GROUP ID
00111110 3E
Universal
MODEL ID
01111111 7F
Function call Pair
ADDRESS
00010001 11
function
0000ffff 0f
Source channel H
0sssssss sh
Source channel L
0sssssss sl
Destination channel H
DATA
0ddddddd dh
Destination channel L
0ddddddd dl
End of exclusive
EOX
11110111 F7
function
PAIR ON with COPY
PAIR ON with RESET BOTH
PAIR OFF
*1) 0:CH1 – 31:CH32, 128:BUS1 – 135:BUS8, 256:AUX1 – 263:AUX8,
512:STEREO
Effect is 0:Effect 1–3:Effect 4
• In the case of PAIR, you must specify channels for which pairing is pos-
sible.
• In the case of PAIR ON with COPY, you must specify Source Channel
as the copy source, and Destination Channel as the copy destination.
(Function call: link)
channel
0x00
*1)
0x01
*1)
0x02
*1)
Publicité
Table des Matières
