3.12 - OTHER FUNCTIONS
3.12.a - FOLLOW ME function
• This function can be activated only from the remote control.
• This function is not available while the Dehumidification (DRY) and Fan Only (FAN) modes are
active.
In this function, the remote control serves as a thermostat.
a. When the appliance is running, press the key "FOLLOW ME" on the remote control.
b. Move with the remote control in an area of the room different from where the appliance is positioned
(maximum distance is 7÷8 metres) directing it towards the appliance itself and making sure there are no
obstacles between them.
c. Set the desired temperature on the remote control; the appliance works until it takes the temperature of
the area where the remote control is positioned to the value set on the remote control itself.
d. The remote control sends a signal to the appliance and, if it doesn't receive a response within a maximum
time of 7 minutes, the function deactivates.
e. Press the key "FOLLOW ME" on the remote control or switch the appliance off to stop the function.
3.12.b - Short Cut function
• This function can be activated only from the remote control.
a. When the appliance is running in any of its modes, press the key "SHORT CUT" on the remote control
and the appliance automatically configures itself to "AUTO" with a set temperature of 26°C (80 F).
3.12.c - Auto-Restart
a. If the appliance switches off due to interruption of power supply, it automatically restarts with the previous
settings when electrical power is restored.
4 - MAINTENANCE AND CLEANING
Before proceeding with any maintenance and cleaning inter-
vention, always make sure you disconnected the power plug
from the power socket.
Do not touch the metal parts of the appliance when you remove
the filter.
There is a risk of injury due to the sharp metal edges.
Do not use water to clean the internal parts of the air conditioner.
Exposure to water can ruin the isolation, with the risk of electric shocks.
4.1 - CLEANING
4.1.a - Cleaning the appliance and the remote control
a. Use a dry cloth to clean the appliance and the remote control.
b. It is possible to use a cloth moistened with cold water to clean the appliance in case it's very dirty.
Do not use a chemically treated or antistatic cloth to clean the appliance.
Do not use gasoline, solvent, polish or similar solvents.
These products could cause the breakage or deformation of the plastic surface.
>>>>>
EN - 17
DOLCECLIMA COMPACT M