ECOVACS DEEBOT T10 PLUS Manuel D'instructions page 26

No. Malfunction
DEEBOT does not start
auto-emptying after
13
returning to the Empty
Station.
DEEBOT fails to auto-empty
14
the Auto-Empty Dust Bin .
There is debris in the Dust
15
Container.
DEEBOT leaks dust or
16
debris while cleaning.
EN 26
Possible Causes
The Dust Container Lid is not closed.
The Dust Bag is not installed to the Empty Station.
Manually move DEEBOT to the Empty Station will
not trigger Auto-Emptying.
DEEBOT returns to the Auto-Emptying Station
running Video Manager in the App.
Do Not Disturb mode is enabled in ECOVACS
HOME App.
The Dust Bag is full.
If the possible causes are excluded, it might be a
component malfunction.
The Auto-Empty Dust Bin is not installed.
The Dust Bag is full.
The Dust Disposal Port on the Auto-Empty Dust
Bin is stuck by debris.
Dust Evacuation Tube is blocked.
Fine particles are absorbed inside the Dust
Container through the Dust Bag.
The Dust Bag is damaged.
The Dust Disposal Port are stuck by debris.
Solutions
Close the Dust Container Lid.
Install the Dust Bag and close the Dust Container Lid.
In order to make sure DEEBOT starts auto-emptying
successfully, avoid picking up and moving the Empty Station
during the cleaning.
This is normal.
This is normal. Disable Do Not Disturb mode in the App, or
start auto-emptying manually.
Replace the Dust Bag and close the Dust Container Lid.
Please contact customer service.
Please install the Auto-Empty Dust Bin .
Replace the Dust Bag and close the Dust Container Lid.
Uninstall the Auto-Empty Dust Bin and clean the debris on the
Dust Disposal Port.
Clean the Dust Evacuation Tube.
Clean the Dust Container Lid and inner wall.
Check the Dust Bag and replace it.
Uninstall the Auto-Empty Dust Bin and clear the debris.