ECOVACS DEEBOT T10 PLUS Manuel D'instructions page 13

OZMO™ Pro 3.0 Oscillating Mopping System
Note:
1.Install OZMO™ Pro 3.0 Oscillating Mopping System for floor scrubbing.
2.Before installing OZMO™ Pro 3.0 Oscillating Mopping System, please make sure the contacts are thoroughly dry.
3.Please avoid using OZMO™ Pro 3.0 Oscillating Mopping System on the carpet.
4. It is recommended to drench and wring out the Mopping Pad before installing it to have a better cleaning.
1
Add Water
* To prolong the service life of OZMO™ Pro 3.0 Oscillating Mopping System, it
is recommended to use purified water or ECOVACS DEEBOT Cleaning Solu-
tion. Explore more accessories at https://www.ecovacs.com/global.
* Do not soak OZMO™ Pro 3.0 Oscillating Mopping System in water.
2
Dry Contacts Thoroughly
3
Install OZMO™ Pro 3.0 Oscillating Mopping System
4
Start Cleaning
Click
13 EN