Amana ARG3600 Serie Mode D'emploi page 23

Oven Rack Placement
Position oven rack before turning oven on.
WARNING
To avoid damaging oven liner or creating fire, do not line
oven bottom or oven racks with foil.
1. Pull rack forward to stop position.
2. Raise front edge of rack and pull until rack is out of
oven.
3. Place rack in new rack position.
• Curved edge of rack must be toward rear of oven.
Oven Rack Placement
Place Grates and Burner Caps
A
B
C
A—Burner grate
B—Burner cap
C—Burner base
Place Grates and Burner Caps
All manuals and user guides at all-guides.com
23
To make sure cap is properly aligned and leveled, move
burner cap around on burner base. Pegs in the burner
base fit into recess in underside of burner cap. Burner
cap must be correctly seated on burner base for proper
operation of burner.
Make sure proper cap size is on each burner base.
Burner does not burn properly if wrong size burner cap is
placed on burner base.
Turn on burners to check for proper operation. See
Operating Surface Burners section for burner operating
instructions.
Correct
Too small
Not centered
Burner Caps
Too large