McCulloch B33 P Manuel D'utilisation page 5

Harness quick release
you to free yourself from the unit and harness.
See instructions under the heading "Adjusting the
Check that the harness straps are correctly positioned.
operator.
CAUTION:
to the unit.
a
WARNING:
for some time after stopping. This also applies at
idle speed. Contact can result in burns to the skin.
a
WARNING:
a
WARNING:
Engine exhaust fumes contain
monoxide poisoning. Do not start or run the unit
a
WARNING:
The exhaust fumes from the
combustible material.
Locking nut
A locking nut is used to secure some types of cutting
attachment.
to the direction of rotation of the cutting attachment.
cutting attachment rotates. (The nut has a left-hand
a risk of injury from the teeth of the blade. You must
The nylon lining inside the locking nut must not be so
be replaced after it has been put on approximately 10
times.
All manuals and user guides at all-guides.com
Cutting equipment
IMPORTANT:
a
a
Grass blades and grass cutters are intended for
cutting coarse grass.
A trimmer head is intended for trimming grass.
Keep the teeth of the blade correctly sharpened.
gauge. An incorrectly sharpened or damaged blade
increases the risk of accidents.
Check the cutting attachment for damage or cracks. A
5
Decrease the risk of blade thrust.
Obtain maximum cutting performance.
Extend the life of cutting equipment.
Refer to the instructions for the cutting attachment
and the correct line diameter.
Keep the teeth of the blade correctly sharpened.
instructions on the blade packaging.
WARNING:
Stop the engine before doing any
attachment has stopped rotating completely.
Disconnect the lead from the spark plug.
WARNING:
Using an incorrect cutting
attachment or an incorrectly sharpened blade
increases the risk of kickback.
Grass blades and trimmer heads
General rules