Toro HDX SD 2000 Serie Manuel De L'utilisateur page 9

112-3858
1. Read the Operator's
Manual.
2. Read the Operator's
Manual before performing
maintenance.
112-9028
1. Warning—stay away from moving parts; keep all guards
and shields in place.
116-5610
1. Hour meter
2. Power take-off (PTO)
3. Parking brake
decal112-3858
3. Remove the key before
adjusting the height of cut.
4. Height-of-cut settings
decal112-9028
decal116-5610
4. Neutral
5. Operator presence switch
6. Battery
1. Read the Operator's Manual.
2. Rotate the drive release knob to loosen, slide the knob,
and tighten.
3. Push the machine.
1. Traction belt routing
1. Belt routing
7
116-8588
109-6014
117-1194
2. Engine
decal116-8588
decal109-6014
decal117-1194