Toro HDX SD 2000 Serie Manuel De L'utilisateur page 14

Product Overview
1. Height-of-cut deck-lift
pedal
2. Height-of-cut positions
3. Transport lock
4. Controls
5. Motion-control levers
6. Roll bar
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
1. Position for optional power
point
2. Choke control
3. Throttle control
4. Hour meter
Figure 4
7. Shock assembly
8. Seat belt
9. Fuel cap
10. Parking-brake lever
11. Mower deck
12. Caster wheel
Figure 5
5. Blade-control switch
(power takeoff)
6. Key switch
7. Switch position for optional
light kit
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Choke Control
Use the choke control to start a cold engine.
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
Blade-Control Switch (Power
g227688
Takeoff)
The blade-control switch, represented by a
power-takeoff (PTO) symbol, engages and
disengages power to the mower blades
Hour Meter
The hour meter records the number of hours the
engine has operated. It operates when the engine
is running. Use these times for scheduling regular
maintenance (Figure
1. Safety-interlock symbols
2. Hour meter
g271171
Safety-Interlock Indicators
There are symbols on the hour meter that indicate
with a black triangle that the interlock component is
positioned correctly
12
, R , and S . Refer to
FF UN TART
25).
LOW
5).
6).
Figure 6
3. Battery light
(Figure 6).
to F
AST
(Figure 5).
g187133